X26v4 low latency high speed high frame real time ultra low light level LLL cmos intensified day night vision imaging system module core camera
The feather light and micro mini envelope is ideal for integration into hands free,
head mounted applications.
THE X26v4 VASTLY OUTPERFORMS ALL AVAILABLE CAMERAS, and IMAGERS IN SENSITIVITY AND LLL CAPABILITIES HANDS DOWN.
Available with integrated OLED realtime high speed SXGA
micro-display for HMD head mounted custom applications
Compared to image intensifier tubes and I2 based cameras,
our AI enabled electronic solid state
sensor can be safely used in day, dusk, and night with extraordinary performance.
The detector can see the battlefield 1064 nanometer (nm) targeting Laser as well as be subjected to intense light sources without adverse effects.
-Most sensitive ULLL FPA.
-Fully immersive, high fidelity Ultra low light performance.
-Micro Miniature ultra lightweight platform
-Can be used with a variety of COTS lightweight lenses
-Low power.
-Robust, Reliable system.
-ISR, ideal for security, surveillance // land, air or marine navigation.
-Low Latency, high speed.
-C-UAS, UAS, USV, UGV, UAV CUAS drone integration, detection and countermeasure sensor
-Integration into day/night vision EOIR multi sensor imaging systems, subsystems, portable, targeting, RWS Remote weapon station, scope, mobile, airborne, turret, gimbal, PTZ platforms.
-The most sensitive tubeless system available anywhere on par with the latest I2 image intensifier.
-1 MPX, or 2 MPX options w/20 Micron cell Broadband BSTFA sensor with MDIS Processing.
-Excellent response from 400-1200 nm
-Can be used in full daytime/twilight with no adverse effects
-Anti fog/haze/environmental clutter
-Ideal for Military, HS, LE night vision applications as well as Scientific/medical imaging where extremely defined imagery is desired in very low light environments.
-1064 nm camera See Spot JTAC laser detection in day, dusk, night.
X26v4-S Specifications
Image sensor MDIS/BSTFA FPA
Spectral response wavelength 400nm ～ 1200nm (optional: Customised to see JTAC 1064 nm Nanometer Seespot laser in day)
Image resolution 840×640
Pixel size 20μm
Sensitivity: highest performing imager available in starlight no moon conditions
Lux 0.00004 Lx
Haze / clutter mitigation: Yes
Image correction/enhancement Auto
Frame rate 60HZ, 120 available
OLED resolution SXGA (OLED 1280×1024, Optical eyepiece with -6 to +6 diopter w/electronics driver integrated into sensor module available for head-mounted, hands free, soldier borne, helmet mounted NVG, HMD and assorted applications
Boot time 3.5s
Brightness / Dynamic range Auto
Lens interface: CS/C accepts standard C mount lenses
Digital output Direct interface OLED display
Communication control protocol RS232
Synchronization mode Internal sync
Weight 28g
Day/night operation: Yes, can be operated 24/7/365
Size 34mm×19mm
Operating voltage 3-5V dc
Power consumption ＜ 1.1W
Operating temperature：-20℃～ 55℃ ( Expandable to -40℃～ 70℃ )
X26v4-H Specifications
Image sensor MDIS/BSTFA FPA
Spectral response wavelength 400nm ～ 1200nm (optional: Customised to see JTAC 1064 nm Nanometer Seespot laser in daylight)
Image resolution 1920×1200
Pixel size 15μm
Sensitivity highest performing imager available in starlight no moon conditions
Lux 0.00004 Lx
Haze / clutter mitigation: Yes
Image correction/enhancement Auto
Frame rate 30/60HZ
Boot time ＜ 3.9s
Brightness / Dynamic range Auto
Lens Mount COTS
Digital output Mini HD-SDI/HDMI
Communication control RS422
Sync mode Internal and external synchronization
Weight ＜ 30g
Size 36mm×36mm×28mm
Day/night operation: Yes, can be operated 24/7/365
Operating voltage 5V dc
Typical power consumption ＜ 2.1W
Operating temperature：-20℃～ 55℃ ( Expandable to -40℃～ 65℃ )
